Results 16 from 16 Products
B1.372 Low-block clamping cylinders
single acting with spring return
max. operating pressure 500 bar		 Clamping elements with vertical and horizontal force component
piston diameter 10 up to 36 mm
3 sizes with max. clamping forces from 8.5 to 40 kN
piston stroke 8 and 10 mm
clamping stroke 4 mm
 
Revised
B1.480 Hydraulic threaded-body clamping modules
pull-type
single and double acting
with protection against torsion
max. operating pressure 500 bar		 Pull-type threaded-body clamping module, which can be used for radial clamping in bore holes in combination with Ringspann discs or Urelast material.
option: mounting body
1 size with max. force to pull of 24.5 kN
clamping stroke, pull type 6 mm
 
B1.481 Bore clamp with centring function
double-acting , pull-type
clamping diameter 14 to 46 mm
max. operating pressure from 50 up to 350 bar		 Clamping element for centring and clamping of workpieces with smooth machined bores and a support surface square to the bore axis
bore hole diameter from 16 to 46 mm
5 sizes with max. low clamping force of 7.9 kN
accessories: segment clamping bushings with 0.1 mm graduation
 
New
B1.4841 Bore clamp
Block-type
without centring function
double acting
for bore hole diameter 7.8 - 17.7 mm
max. operating pressure 250 bar		 Clamping elements in block-type version for clamping of workpieces,
with bore holes in the support face
bore hole diameter from 7.8 to 17.7 mm
with pneumatic seat check
with connection for positive air pressure protection
2 sizes with max. low clamping force of 9.8 kN
accessories: spare clamping sets
 
New
B1.4842 Bore clamp
Flange-type version
without centring function
double acting
for bore hole diameter 7.8 - 17.7 mm
max. operating pressure 250 bar		 Clamping elements in flange-type version for clamping of workpieces,
with bore holes in the support face
bore hole diameter from 7.8 to 17.7 mm
with pneumatic seat check
with connection for positive air pressure protection
2 sizes with max. low clamping force of 9.8 kN
accessories: spare clamping sets
 
New
B1.4843 Bore clamp
Cartridge type
without centring function
double acting
for bore hole diameter 7.8 - 17.7 mm
max. operating pressure 250 bar		 Clamping elements in cartridge-type version for clamping of workpieces,
with bore holes in the support face
bore hole diameter from 7.8 to 17.7 mm
with pneumatic seat check
with connection for positive air pressure protection
2 sizes with max. low clamping force of 9.8 kN
accessories: spare clamping sets
 
B1.490 Slideway locking cylinders
single acting without spring return
max. operating pressure 500 bar		 With rectangular screw-down housing
with one or two installed pistons
1 piston: max. locking force of 24.5 kN
2 pistons: max. locking force of 49.0 kN
piston stroke 2 mm
 
Revised
B1.494 Spring clamping cylinders
pull-type
with hydraulic return
h = 1 mm
max. unclamping pressure 210 up to 300 bar		 Clamping cylinder, which clamps mechanically by Belleville springs
unclamping hydraulically
5 sizes with max. clamping forces from 16 to 100 kN
max. unclamping stroke 1 mm
 
Revised
B1.8231 Flat clamps
with optional position monitoring
double acting
max. operating pressure 500 bar		 Compact and flat clamping element
clamping lever is completely retracted in unclamped mode
2 sizes with max. clamping forces up to 14.6 or 23.6 kN
clamping strokes (vertical) 9 up to 16 mm
 
B1.8232 Block clamps
with / without self-locking
double acting
max. operating pressure 100 / 160 bar		 Compact and flat clamping element
versions also with self-locking
clamping motion first linear with following swing motion
adjustable clamping direction
2 sizes with max. clamping forces up to 8 or 32 kN
clamping strokes (vertical) 6 and 8 mm
 
Revised
B1.8234 Hand slide clamps
with optional position monitoring
single acting
max. operating pressure 500 bar		 Clamp with manually displaceable clamping lever
clamping lever easily exchangeable
2 sizes with max. clamping forces of 15 or 25 kN
clamping stroke (vertical) 12 mm
 
Revised
B1.8241 Slide pivot clamp
with optional position monitoring
double acting
max. operating pressure 500 bar		 Clamp with very high clamping force in relation to its base
clamping lever is completely retracted in unclamped mode
option: inductive or pneumatic control of the clamping lever
3 sizes with max. clamping forces from 15 to 50 kN
clamping strokes (vertical) 7 up to 9.5 mm
 
Revised
B1.8242 Slide pivot clamp
compact version
with optional position monitoring
double acting
max. operating pressure 350 bar		 Clamp in compact version
with very high clamping force in relation to its base
with metallic wiper
clamping lever is completely retracted in unclamped mode
option: inductive or pneumatic control of the clamping lever
1 size with max. clamping force of 10 kN
clamping stroke (vertical) 5.5 mm
 
Revised
B1.825 Hinge clamps
double acting
max. operating pressure 200 bar		 Low-cost and compact clamping element
with high clamping force for simple clamping tasks
clamping lever is completely retracted in unclamped mode
1 size with max. clamping force of 15 kN
clamping stroke (vertical) 6 mm
 
Revised
B1.8251 Hinge clamps
with metallic wiper and optional position monitoring
double acting
max. operating pressure 250 bar		 Low-cost and compact clamping element with high
clamping force and various installation and connecting possibilities
with metallic wiper
clamping lever is completely retracted in unclamped mode
option: extended piston rod
accessory: inductive or pneumatic control of the clamping lever
2 sizes with max. clamping force of 4 and 10 kN
clamping range 4 and 5.7 mm
 
New
B1.8252 Mini hinge clamps
with metallic wiper
double acting
max. operating pressure 250 bar		 Low-cost and compact clamping element with minimum dimensions
with metallic wiper
clamping lever is completely retracted in unclamped mode
1 size with max. clamping force of 2,2 kN
clamping range 3.0 mm