Results 6 from 6 Products |
F9.300 Cutting ring unions
as per DIN 2353 - hydraulic oil - seamless precision steel tubes -
connecting inserts pressure gauge Hydraulic oil seamless precision steel tubes connecting inserts pressure gauge |
Fittings with knife edge or elastic
sealing hydraulic oil in reservoirs of 1, 5 and 20 litres galvanized St 37 precision steel tubes 8 to 15 mm connecting inserts for hydraulic lines ND 5, 500 bar pressure gauge with glycerine filling with measuring ranges 0 to 40, 100, 250, 400 and 600 bar accessory: pressure gauge union and elbow tubes |
|
F9.310 Tube clamps Material: Polypropylene, Ultramid |
Tube clamps for one or two tubes tube diameter 8 to 16 mm accessory: weld-on plates for tube clamps |
|
F9.360 Hydraulic
high-pressure hoses |
Equipped with fittings, hydraulic high-pressure hoses resistant to mineral oil ND 4 up to 12.7 lengths as per preferred series, but also individually selectable accessory: workshop hose press max. operating pressure 250 bar up to 500 bar |
|
Revised F9.500 High-pressure filter max. operating pressure 350 bar |
To protect hydraulic elements against
contaminations installation especially in front of valves or intensifiers also a version for 500 bar also a cartridge-type version for drilled channels filter quality of 10, 20 and 100 µm filter material bronze, steel and stainless steel housing aluminium, galvanized steel and stainless steel |
|
F9.600 Hydraulic
accumulator Nominal volume 13 cm³ - 750 cm³ operating pressure 250 / 500 bar |
Diaphragm for energy storage for compensation of internal leakages or to reduce temperature influences in case of disconnected clamping systems filling gas: nitrogen operating temperature -10 up to +80°C gas-preload pressure 40 to 100 bar min. operating pressure 45 up to 110 bar |
|
Revised F9.731 Pressure switch, electro-hydraulic Pressure range 5-180 bar / 50-350 bar and 80-600 bar |
Piston pressure switch, which operates a
micro switch if an adjustable pressure is obtained hydraulic connection with O-ring sealing accessory: connecting plate G 1/4 switch type: single-pole change-over contact electrical connection with device plug DIN EN 175301-803 A contact rating 5 A at 250 VAC, 3 A at 30 VDC code class IP 65 |
|