closed O-type frame design
with hydro-cylinder
with hydraulic cylinder and quick-change tooling system
accessory: electro-hydraulic drive units
accessory: contact pieces
Mounting holes as per customer's requirements
clear height up to 800 mm
cylinder stroke 100 to 500 mm
Table-top version with control
Bench devices with electro-hydraulic control
with mounting aperture as per DIN 810 or quick-change tooling system
with ground table plate with concentric bore hole
with two-hand control
with rapid and creep speed control and return stroke limitation
accessory: contact pieces
cylinder stroke 250 and 320 mm
motor 1.1 and 1.5 kW 400 VAC
Bench devices with electro-hydraulic control
with quick-change tooling system
with two-hand control
with rapid and creep speed control and return stroke limitation
mounting holes as per customer's requirements
accessory: contact pieces
clear height up to 800 mm
clear width 250 up to 600 mm
cylinder stroke 100 to 500 mm
motor 0.75 up to 2.2 kW 400 VAC
M6.6056 Press-in devices 150 kN
Bench devices with electro-hydraulic control
with mounting aperture as per DIN 810
with two-hand control
with rapid and creep speed control and return stroke limitation
accessory: contact pieces
clear height 297 mm
clear width 430 mm
cylinder stroke 200 mm
motor 1.1 / 2.2 kW 400 VAC
with press-in force control and
interpretation of the press-in process
version as per data sheet M 6.6055, but:
with programmable press-in force control
with stroke and force measuring system
with operation, display and interpretation unit
with interface RS 232 for data output
with press-in force control and
interpretation of the press-in process
version as per data sheet M 6.6056, but:
with programmable press-in force control
with stroke and force measuring system
with operation, display and interpretation unit
with interface RS 232 for data output
with press-in force control and graphic recording
with pressure transducer, position measuring system
and electronic interpretation unit
table system with moving mechanism with fixed rollers and steering rollers
with quick-change tooling system
with two-hand control
clear hight 300 up to 550 mm
clear width 250 up to 460 mm
cylinder stroke 250 to 500 mm
motor 0.75 up to 1.5 kW 400 VAC
Bench devices with electro-hydraulic control and two-hand safety control
completion of the press-in device as per customer's requirements
hydraulic connection G 3/8 and G 1/2
flow rate 1.5 up to 15.6 l/min
max. operating pressure 200 bar
motor 0.75 up to 2.2 kW 400 VAC
upper contact piece operated by hydro-cylinder
lower contact piece adjustable in height
accessory: contact pieces
with quick-change tooling system
with two-hand control
max. clear height 280 up to 560 mm
cylinder stroke 100 mm
nominal pressure force 25 to 80 kN