Results 5 from 5 Products |
Revised B1.711 Hydro-cylinders with locking piston single acting with spring return max. operating pressure 500 bar |
Hydro-cylinder with hydraulic locking of
the piston for high loads up to 25,5 kN Threaded-body cylinders Block cylinders Low-block clamping cylinders piston diameter 20 mm stroke 10 mm |
|
Revised B1.730 Clamping and supporting elements self-locking double acting max. operating pressure 300 bar |
Combined clamping and supporting elements with mechanical locking according to the wedge principle clamping bolt secured against torsion connecting thread and manifold connection with O-ring Perbunan seals clamping bolt diameter 12 and 22 mm 3 sizes with max. clamping forces of 5 to 18 kN clamping strokes 5 to 12 mm |
|
New B1.7301 Clamping and supporting element cartridge-type, self-locking double acting max. operating pressure 300 bar |
Combined clamping and supporting element
- cartridge-type with mechanical locking according to the wedge principle Option: extended piston rod Accessory: inductive or pneumatic position monitoring Accessory: built-in housing FKM seals Clamping bolt diameter 12 mm 1 size with max. clamping force of 5 kN Clamping stroke 5 mm |
|
B1.732 Position flexible clamps separate locking port double acting max. operating pressure 250 bar |
Small hydraulic vice independently of the position of the workpiece connecting thread and manifold connection with O-ring 1 size with max. clamping force of 7 kN (max. holding force = 4 kN) clamping stroke (per clamping jaw) 6 mm |
|
Revised B1.733 Position flexible clamping claw double acting separate locking port with optional position monitoring max. operating pressure 250 bar |
Clamping element for supporting and
clamping of unstable workpiece sections adapts itself to the position of the clamping point without deforming it. connecting thread and manifold connection with O-ring 1 size with max. clamping force of 7.5 kN (max. holding force = 10 kN) Pendulum range ± 4 mm |
|